1
A. Kargarian, S. Karimian, "Numerical investigation of an active Gurney flap performance in a new flow control strategy to reduce dynamic stall effects of helicopter blade section in forward flight condition", Journal of The Brazilian Society of Mechanical Sciences and Engineering, 2025 Apr
vol. 47,
no. 252,
pp.1-15,
2025.
2
F. Hosseinzadeh Esfahani, S. Karimian, "Numerical Study of Advance Ratio Effect on Dynamic Stall of the Helicopter Rotor Blade in Forward Flight", , 2024 Nov
vol. 14,
no. 5,
pp.1-25,
2024.
3
F. Hosseinzadeh Esfahani, S. Karimian, "Three-Dimensional Numerical Investigation on the Dynamic Stall Behavior of the Helicopter Rotor Blade at Forward Flight Speeds", Arabian Journal For Science and Engineering, 2024 Oct
vol. 1,
no. 1,
pp.1-20,
2024.
4
A. Ghorbanpoor Lafmejani, S. Karimian, Mohammad Sadegh Moradi Ghareghani, "Aerodynamic Performance Improvement of 3-PB VAWT using blades with optimized tilted angles", Cleaner Engineering and Technology, 2024 Sep
vol. 22,
no. 100801,
pp.1-25,
2024.
5
Vahid Tahmasebi, S. Karimian, S. Noori, "A Combined Parameter and Function Estimation Approach for Prediction of Solidification/Melting Process in a Smelting Furnace", Scientia Iranica, 2024 Jul
vol. 1,
no. 1,
pp.1-25,
2024.
6
Vahid Tahmasebi, S. Karimian, S. Noori, "An inverse front tracking method for modeling solidification process in a smelting furnace", Applied Thermal Engineering, 2024 Jul
vol. 248,
no. 123300,
pp.1-15,
2024.
7
R. Afshari, S. Karimian, "Numerical investigation on the use of various blade tips for the helicopters main rotor blade in forward flight regarding aerodynamic performance and HSI noise considerations", Aerospace Science and Technology, 2024 Jun
vol. 149,
no. 109142,
pp.1-19,
2024.
8
A. Kargarian, S. Karimian, "Dynamic stall alleviation of a helicopter blade section in forward flight condition using an optimized combination of active nose droop and active Gurney flap", Journal of Aerospace Engineering, 2024 May
vol. 37,
no. 15,
pp.1-1,
2024.
9
F. Jahanbakhsh, S. Karimian, "Numerical investigation on effect of leading-edge deformation to alleviate dynamic stall of pitching airfoil in unsteady flow", Wind Engineering, 2024 May
vol. 1,
no. 1,
pp.1-17,
2024.
10
R. Afshari, S. Karimian, "A new blade tip geometry to improve aerodynamic performance and acoustic noise of helicopter blade in hovering flight", Aerospace Science and Technology, 2023 Apr
vol. 135,
no. 108197,
pp.1-20,
2023.
11
M.S. Moradi Ghareghani, A. Abdolahifar, S. Karimian, "Numerical investigation on the helix angle to smoothen aerodynamic torque output of the 3-PB Darrieus vertical axis wind turbine", Journal of Wind Engineering and Industrial Aerodynamics, 2023 Feb
vol. 234,
no. 105323,
pp.1-17,
2023.
12
S.M. Hasheminasab Zavare, S. Karimian, S. Noori, "Effect of Grid Resolution on NACA0012 Self-Noise Prediction by Large Eddy Simulation", Energy Equipment and Systems, 2022 Dec
vol. 10,
no. 4,
pp.389-399,
2022.
13
A. Abdolahifar, S. Karimian, "A comprehensive three-dimensional study on Darrieus vertical axis wind turbine with slotted blade to reduce flow separation", Energy, 2022 Jun
vol. 248,
no. 123632,
pp.1-22,
2022.
14
F. Hosseinzadeh Esfahani, S. Karimian, Hamid Parhizkar, "Characterization of the effect of the helicopter isolated blade vortex on dynamic stall", , 2022 Apr
vol. 54,
no. 1,
,
2022.
15
F. Ardaneh, A. Abdolahifar, S. Karimian, "Numerical analysis of the pitch angle effect on the performance improvement and flow characteristics of the 3-PB Darrieus vertical axis wind turbine", Energy, 2021 Oct
vol. 239,
no. 0,
pp.122339-122339,
2021.
16
Hamed Alisadeghi, S. Karimian, Amin Balazadeh Koucheh, "Comparison of collocated methods of MCIM and PWIM for different solution algorithms in CVFEM", International Journal For Computational Methods In Engineering Science & Mechanics, 2021 Apr
vol. 1,
no. 1,
pp.1-37,
2021.
17
S.M. Hasheminasab Zavare, S. Karimian, S. Noori, M. Saeedi, Chris Morton, "Experimental investigation of the wake dynamics for a NACA0012 airfoil with a cut-in serrated trailing-edge", Physics of Fluids, 2021 Apr
vol. 33,
no. 55122,
pp.1-18,
2021.
18
S. Karimian, S.V. Aramian, A. Abdolahifar, "Numerical investigation of dynamic stall reduction on helicopter blade section in forward flight by an airfoil deformation method", Journal of The Brazilian Society of Mechanical Sciences and Engineering, 2021 Jan
vol. 43,
no. 2,
pp.1-17,
2021.
19
A. Abdolahifar, S. Karimian, ".", , 2020 Jul
vol. 53,
no. 5,
pp.1-10,
2020.
20
S. Karimian, A. Abdolahifar, "Performance Investigation of a New Darrieus Vertical Axis Wind Turbine", Energy, 2019 Nov
vol. 0,
no. 0,
,
2019.
21
A. Abdolahifar, S. Karimian, "Aerodynamic Performance Investigation of a Vertical Axis Wind Turbine Instead of Conventional Ram Air Turbines of Airplane", , 2019 Mar
vol. 0,
no. 0,
,
2019.
22
A. Abdolahifar, S. Karimian, "Aerodynamic Performance Improvement of Hybrid Darrieus-Savonius Vertical Axis Wind Turbine", , 2019 Feb
vol. 0,
no. 0,
,
2019.
23
S. Karimian, A. Amani, Mahbod Seyednia, "Feasibility study of symmetric solution of molecular argon flow inside microscale nozzles", Applied Mathematics and Mechanics-English Edition, 2018 Feb
vol. 0,
no. 0,
pp.1-12,
2018.
24
S.N. Hosseini, S. Karimian, "Immersed Boundary Method based on the Implementation of Conservation Equation along the Boundary using Control Volume Finite Element Scheme", Journal of Aerospace Technology and Management, 2017 Jul
vol. 9,
no. 3,
pp.287-300,
2017.
25
M. Khoshlessan, S. Karimian, "Detailed Numerical Study on the Aerodynamic Behavior of a Gurney Flapped Airfoil in the Ultra-low Reynolds Regime", Journal of Aerospace Technology and Management, 2017 Apr
vol. 9,
no. 2,
pp.203-217,
2017.
26
A. Amani, S. Karimian, Mahbod Seyednia, "A Molecular Dynamics Simulation on the Effect of Different Parameters on Thermal Resistance of Graphene-Argon Interface", Molecular Simulation, 2016 Dec
vol. 43,
no. 4,
pp.276-283,
2016.
27
M. Arabghahestani, S. Karimian, "Molecular dynamics simulation of rotating carbon nanotube in uniform liquid argon flow", Journal of Molecular Liquids, 2016 Nov
vol. 225,
no. 0,
pp.357-364,
2016.
28
V. Tahmasbi, S. Karimian, "A New Algorithm for Shock Sensor Calculation at Supersonic Speeds on a 3D-Unstructured Grid", Journal of Aerospace Technology and Management, 2016 Nov
vol. 8,
no. 4,
pp.441-450,
2016.
29
H.R. Abbasi, S. Karimian, "Water mass flow rate in a finite SWCNT under electric charge: A molecular dynamic simulation", Journal of Molecular Liquids, 2016 Oct
vol. 224,
no. 0,
pp.165-170,
2016.
30
H.R. Abbasi, S. Karimian, "Effect of Electric Charging on the Velocity of Water Flow in CNT", Journal of Molecular Modeling, 2016 Aug
vol. 22,
no. 9,
pp.1-8,
2016.
31
H. Ramezaninajafi, S. Karimian, "ANALYSIS OF PRESSURE BEHAVIOR IN A TEMPERATURE CONTROLLED MOLECULAR DYNAMIC FLOW", Journal of Theoretical and Applied Mechanics, 2016 Jul
vol. 54,
no. 3,
pp.881-892,
2016.
32
H. Behrooz Khaniki, S. Karimian, "Satellite Attitude Determination Using Absorbed Heat Fluxes", Journal of Aerospace Engineering, 2016 Jun
vol. 29,
no. 4,
,
2016.
33
S.M. Hasheminasab Zavare, S. Karimian, "New indirect method for calculation of flow forces in molecular dynamics simulation", Journal of Molecular Liquids, 2015 Feb
vol. 206,
no. 0,
pp.183-189,
2015.
34
H. Behrooz Khaniki, S. Karimian, "Determining the heat flux absorbed by satellite surfaces with temperature data", Journal of Mechanical Science and Technology, 2014 Jun
vol. 28,
no. 6,
pp.2393-2398,
2014.
35
S. Karimian, Saeed Izadi, "Bin size determination for the measurement of mean flow velocity in molecular dynamics simulation", International Journal For Numerical Methods In Fluids, 2012 Jun
vol. 0,
no. 0,
,
2012.
36
Sahar Noori, F. Mahdvizafarghandi, S. Karimian, "Two Dimentional Simulation of Laminar Flow Around a Couple of Bodies in Relative Motion", International Journal of Advanced Design and Manufacturing Technology, 2012 Jun
vol. 5,
no. 3,
pp.29-37,
2012.
37
S. Karimian, S. Namvar, "Implementation of SMC averaging method in a channeled molecular flow of liquids and gases", Journal of Physics:conference Series, 2012 May
vol. 362,
no. 0,
,
2012.
38
S. Namvar, S. Karimian, "Detailed investigation on the effect of wall spring stiffness on velocity profile in molecular dynamics simulation", Journal of Physics:conference Series, 2012 May
vol. 362,
no. 0,
,
2012.
39
S. Karimian, M. Ardakani, "Immersed Boundary Method for the Solution of @d Inviscid Compressible Flow Using Finite Volume Approach on Moving Cartesian Grid", Journal of Applied Fluid Mechanics, 2011 Aug
vol. 4,
no. 3,
pp.27-36,
2011.
40
H. Alisadeghi, S. Karimian, "Comparison of Different Solution Algorithms for Collocated Mathod of MCIM to Calculate Steady and Unsteady Incompressible Flows on Unstructured grids", Computers and Fluids, 2010 Dec
vol. 1,
no. 1,
pp.1-1,
2010.
41
S. Karimian, S. Izadi, A. Barati Farimani, "A study on the measurement of mean velocity and its convergence in molecular dynamics simulations", International Journal For Numerical Methods In Fluids, 2010 Dec
vol. 64,
no. 10,
,
2010.
42
M. Mani, S. Karimian, "Unsteady wake measurements behind an airfoil and prediction of dynamic stall from the wake", Aircraft Engineering and Aerospace Technology, 2010 Jul
vol. 82,
no. 4,
,
2010.
43
H. Alisadeghi, S. Karimian, "Different modelings of cell-face velocities and their effects on the pressure-velocity coupling, accuracy and convergence of solution", International Journal For Numerical Methods In Fluids, 2010 Jan
vol. 0,
no. 0,
,
2010.
44
S. Noori, S. Karimian, "Using Axisysymmetric Analogue Along The Streamlines for the Solution of Three-Dimensional Viscous Shock Layer Equations of Hypersonic Equilibrium Flow", International Journal of Computational Fluid Dynamics, 2008 Jul
vol. 22,
no. 6,
,
2008.
45
S. Noori, S. Karimian, "Numerical Solution of Three-Dimensional Viscous Shock Layer Using Axisymmetric Analog Along The Streamlines", International Journal of Heat and Fluid Flow, 2008 Jan
vol. 18,
no. 1,
,
2008.
46
H. Parhizkar Ghazani, S. Karimian, "Caculation of The Viscous -Interaction Effects in The Euler /Boundary -Layer Methods", Proceedings of The Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering, 2008 Jan
vol. 0,
no. 222,
,
2008.
47
M. Maarephat, S. Karimian, "An Engineering Inviscid -Boundary Layer Method For Calculation of Aerodynamic Heating in The Leeward Region", , 2007 Feb
vol. 31,
no. 1,
,
2007.
48
S.M. Mirsajedy, S. Karimian, "Evaluation of a Two-Dimensional Moving Mesh Method for Rigid Body Motions", , 2006 Jul
vol. 110,
no. 1109,
,
2006.
49
H. Parhizkar Ghazani, S. Karimian, M. Mani, "Numerical Simulation of Flow Past Oscillating Airfoil Using Oscillation of Flow Boundary Condition", , 2006 Mar
vol. 3,
no. 1,
,
2006.
50
S.M. Mirsajedy, S. Karimian, M. Mani, "A Multizone Moving Mesh Algorithm for Simulation of Flow Around a Rigid Body With Arbitrary Motion", , 2006 Jan
vol. 128,
no. 2,
,
2006.
51
A. Shojaei Soghorloo, S. Ghaffarian Anbaran, S. Karimian, "Three-dimensional process cycle simulation of composite parts manufactured by resin transfer modeling", Composite Structures, 2004 Sep
vol. 0,
no. 65,
,
2004.
52
A. Shojaei Soghorloo, F. Trochu, S. Ghaffarian Anbaran, S. Karimian, L. Lessard, "An experimental study of saturated and unsaturated permeabilities in resin transfer modeling based on unidirectional flow measurements", Journal of Reinforced Plastics and Composites, 2004 Sep
vol. 23,
no. 14,
pp.1515-1522,
2004.
53
A. Shojaei Soghorloo, S. Ghaffarian Anbaran, S. Karimian, "Numerical simulation of three-dimensional mold filling in resin transfer molding", Journal of Reinforced Plastics and Composites, 2003 Nov
vol. 22,
no. 16,
pp.1497-1533,
2003.
54
A. Shojaei Soghorloo, S. Ghaffarian Anbaran, S. Karimian, "Simulation of the three - dimensional non - isothermal mold filling process in resin transfer molding", Composites Science and Technology, 2003 Oct
vol. 63,
no. 1,
pp.1931-1948,
2003.
55
A. Shojaei Soghorloo, S. Ghaffarian Anbaran, S. Karimian, "Modeling and simulation approaches in resin transfer molding process: a review", Polymer Composites, 2003 Aug
vol. 24,
no. 4,
pp.525-544,
2003.
56
A. Shojaei Soghorloo, S. Ghaffarian Anbaran, S. Karimian, "Numerical analysis of controlled injection strategies in resin transfer molding", Journal of Composite Materials, 2003 Jun
vol. 37,
no. 11,
pp.1011-1035,
2003.
57
A. Shojaei Soghorloo, S. Ghaffarian Anbaran, S. Karimian, "Numerical simulation of three- dimensional mold filing process in resin transfer molding using quasi-steady state and partial saturation formulations", Composites Science and Technology, 2002 May
vol. 62,
no. 1,
pp.861-879,
2002.